 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UNISONIC TECHNOLOGIES CO., LTD U74LVC1G14 SINGLE SCHMITT-TRIGGER INVERTER 3 2 1 CMOS IC 5 DESCRIPTION The U74LVC1G14 is a single Schmitt-trigger inverter, it provides the function Y=A. The device have different input threshold levels for positive- going (VT+) and negative-going(VT-) signals because of the Schmitt-trigger action in the input. This device has power-down protective circuit, preventing device destruction when it is powered down. 2 1 4 SOT-25 3 5 4 SOT-353 FEATURES * Operation Voltage Range: 1.65~5.5V * Low Power Dissipation: ICC=10A(Max) * 24mA output drive(VCC=3.0V) * High Noise Immunity * Power Down Protection *Pb-free plating product number: U74LVC1G14L ORDERING INFORMATION Order Number Normal Lead Free Plating U74LVC1G14-AF5-R U74LVC1G14L-AF5-R U74LVC1G14-AL5-R U74LVC1G14L-AL5-R Package SOT-25 SOT-353 Packing Tape Reel Tape Reel U74LVC1G14L-AF5-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel (2) AF5: SOT-25, AL5: SOT-353 (3) L: Lead Free Plating, Blank: Pb/Sn MARKING 3 2 3A4 Lead Plating 4 5 1 www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-081,A U74LVC1G14 PIN CONFIGURATION GND 3 A 2 NC 1 CMOS IC 4 Y 5 VCC FUNCTION TABLE (each gate) INPUT A L H OUTPUT Y H L LOGIC DIAGRAM (positive logic) A 2 4 Y A 2 4 Y UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-081,A U74LVC1G14 ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 1) PARAMETER Supply Voltage Input Voltage Output Voltage(active mode) CMOS IC SYMBOL RATINGS UNIT VCC -0.5~6.5 V VIN -0.5~6.5 V VOUT -0.5~VCC+0.5 V Output Voltage(power-down mode) VOUT -0.5~6.5 V Input Clamp Current(VIN<0) IIK -50 mA Output Clamp Current(VOUT<0) IOK -50 mA Output Current IOUT 50 mA VCC or GND Current ICC 100 mA Storage Temperature TSTG -65 ~ +150 Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING COMDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT TA CONDITIONS Operating Data retention only MIN 1.65 1.5 0 0 -40 TYP MAX 5.5 5.5 VCC 85 UNIT V V V V STATIC CHARACTERISTICS PARAMETER Positive-Going Input Threshold Voltage SYMBOL TEST CONDITIONS VCC =1.65V VCC =2.3V VCC =3.0V VCC =4.5V VCC =5.5V VCC =1.65V VCC =2.3V VCC =3.0V VCC =4.5V VCC =5.5V VCC =1.65V VCC =2.3V VCC =3.0V VCC =4.5V VCC =5.5V VCC =1.65V ~ 4.5V, IOH=-100 A VCC =1.65V, IOH=-4mA VCC =2.3V, IOH=-8mA VCC =3.0V, IOH=-16mA VCC =3.0V, IOH=-24mA VCC =4.5V, IOH=-32mA MIN 0.76 1.08 1.48 2.16 2.61 0.35 0.56 0.84 1.41 1.87 0.36 0.45 0.51 0.58 0.69 VCC-0.1 1.2 1.9 2.4 2.3 3.8 TYP MAX 1.16 1.56 1.92 2.74 3.33 0.62 0.88 1.2 1.97 2.4 0.64 0.78 0.87 1.04 1.11 UNIT VT+ V Negative-Going Input Threshold Voltage VT- V Hysteresis Voltage (VT+-VT-) VT High-Level Output Voltage VOH V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-081,A U74LVC1G14 STATIC CHARACTERISTICS(Cont.) PARAMETER SYMBOL TEST CONDITIONS VCC =1.65V ~ 4.5V, IOL=100 A VCC =1.65V, IOL=4mA VCC =2.3V, IOL=8mA VCC =3.0V, IOL=16mA VCC =3.0V, IOL=24mA Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance II(LEAK) IOFF IQ IQ CIN VCC =4.5V, IOL=32mA VCC =0V ~ 5.5V, VIN=VCC or GND VCC =0V, VIN or VCC=5.5V VCC =1.65V ~ 5.5V, VIN=VCC or GND IOUT=0 VCC =3V ~ 5.5V, One input at VCC-0.6V, other inputs at VCC or GND VCC =3.3V, VIN=VCC or GND MIN TYP CMOS IC Low-Level Output Voltage VOL MAX 0.1 0.45 0.3 0.4 0.55 0.55 5 10 10 500 UNIT V A A A A pF 4.5 DYNAMIC CHARACTERISTICS PARAMETER Propagation delay from input (A or B) to output(Y) Operating Characteristics Power Dissipation Capacitance SYMBOL VCC(V) 1.8 2.5 3.3 5 0.15 0.2 0.3 0.5 CL=15 pF MIN MAX 2.8 9.9 1.6 5.5 1.5 4.6 0.9 4.4 20 21 CL=30 or 50 pF MIN MAX 3.8 11 2 6.5 1.8 5.5 1.2 5 22 25 UNIT tPLH/tPHL ns Cpd f=10MHz pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-081,A U74LVC1G14 TEST CIRCUIT AND WAVEFORMS CMOS IC Output CL (Note) RL Note: CL includes probe and jig capacitance. VCC 1.8V 0.15V 2.5V 0.2V 3.3V 0.3V 5V 0.5V 1.8V 0.15V 2.5V 0.2V 3.3V 0.3V 5V 0.5V VIN VCC VCC 3V VCC VCC VCC 3V VCC tR, tF 2ns 2ns 2.5ns 2.5ns 2ns 2ns 2.5ns 2.5ns VM VCC/2 VCC/2 1.5V VCC/2 VCC/2 VCC/2 1.5V VCC/2 CL 15pF 15pF 15pF 15pF 30pF 30pF 50pF 50pF RL 1M 1M 1M 1M 1K 500 500 500 VM Input Output VM tPHL VM tPLH VM UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-081,A |
Price & Availability of U74LVC1G14L-AL5-R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |